BSVYQ - CUPRIC CHLORIDE, DIHYDRATE, 1792

  • MSDS: BSVYQ
  • Manufacturer: J T BAKER INC
  • Product Name: CUPRIC CHLORIDE, DIHYDRATE, 1792
  • National Stock Number: 6810-00-300-6194
Product Identification

Product ID:CUPRIC CHLORIDE, DIHYDRATE, 1792
MSDS Date:05/01/1989
FSC:6810
NIIN:00-300-6194
MSDS Number: BSVYQ

Responsible Party
J T BAKER INC
222 RED SCHOOL LANE
PHILLIPSBURG, NJ 08865
US

Emergency Phone: 800-424-8802;800-424-9300(CHEMTREC)

Info Phone: 201-839-2151

Cage: DO803

Contractor
MALLINCKRODT BAKER, INC.
PHILLIPSBURG, NJ 08865 US

Telephone: 800-582-2537

Cage: 70829

Ingredients

2); (CUPRIC CHLORIDE)

CAS: 13933-17-0

RTECS: GL7040000

Fraction By Weight: 90-100%

OSHA PEL 1 MG/M3 (CU)

ACGIH TLV: 1 MG/M3 (CU)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: IRRITATION OF NOSE
AND THROAT, HEADACHE, COUGHING, DIZZINESS, DIFFICULT BREATHING.
SKIN: NONE IDENTIFIED. EYE: NONE IDENTIFIED. SKIN ABSORPTION: NONE
IDENTIFIED. INGESTION: NAUSEA, VOMITING. CHRONIC: NONE IDENTIFIED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.

First Aid

First Aid:INGESTION: CALL PHYSICIAN. IF SWALLOWED, IF CONSCIOUS,
IMMEDIATELY INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR. IF
NOT BREATHING, GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS
DIFFICULT, GIVE OXYG EN. SKIN: FLUSH WITH WATER. EYE: IMMEDIATELY
FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.

Fire Fighting

Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE IDENTIFIED.

Accidental Release

Spill Release Procedures:WEAR NIOSH/MSHA APPROVED SELF-CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE CLOTHING. WITH CLEAN
SHOVEL, CAREFULLY PLACE MATERIAL INTO CLEAN, DRY CONTAINER AND
COVER; REMOVE FROM AREA. FLUSH SPILL AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED.
SUITABLE FOR ANY GENERAL CHEMICAL STORAGE AREA.
Other Precautions:HARMFUL IF SWALLOWED. CAUSES IRRITATION. AVOID
CONTACT WITH EYES, SKIN, CLOTHING. WASH THOROUGHLY AFTER HANDLING.

Exposure Controls

Respiratory Protection:RESPIRATORY PROTECTION REQUIRED IF AIRBORNE
CONCENTRATION EXCEEDS TLV. AT CONCENTRATIONS UP TO 9 PPM, A
NIOSH/MSHA APPROVED HIGH-EFFICIENCY PARTICULATE RESPIRATOR IS
RECOMMENDED. ABOVE THIS LEVEL, A N IOSH/MSHA APPROVED SCBA IS
ADVISED.
Ventilation:USE GENERAL OR LOCAL EXHAUST VENTILATION TO MEET TLV
REQUIREMENTS.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:UNIFORM.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:212F,100C
Spec Gravity:2.51 (H*2O=1)
Solubility in Water:COMPLETE (100%)
Appearance and Odor:BLUE-GREEN CRYSTALS OR POWDER.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
POTASSIUM, SODIUM, WATER.
Stability Condition to Avoid:MOISTURE.
Hazardous Decomposition Products:HYDROGEN CHLORIDE.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE, AND LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.